#1 Clean & Shine
Gently cleans all plastics without scratching. Leaves a lustrous shine that resists fogging, repels dust, and eliminates static.
- Resists finger marking
- Contains no abrasives or harsh chemicals
- Leaves a smooth, clean, greaseless shine
- If the surface is extremely dirty, apply NOVUS No.
1 liberally and wipe using long, sweeping strokes. Do not use pressure
at this time or large dirt particles may scratch the plastic.
- Re-apply NOVUS No. 1. Polish using short, circular
strokes with a clean portion of the cloth.
- When surface is thoroughly clean and uniformly covered,
buff to a slippery glaze with a clean portion of the cloth. Surfaces
buffed to a high glaze are more resistant to dust and future scratching.
- Reapply NOVUS No. 1 regularly to maintain the antistatic, smudge and scratch resistant properties.
#2 Fine Scratch Remover
Removes fine scratches, haziness and abrasions from most plastics. With
repeated use, NOVUS No. 2 restores faded and discolored plastics.
- Removes the damage instead of filling it in
- Buffs out quickly
- After restoring, seals with a coat of polish
- Observe condition of the surface to be treated. The deeper the scratches, the greater the pressure required to remove
them. If the surface is dirty, clean with NOVUS No.1 before applying NOVUS No. 2.
- Shake well. Test in an inconspicuous area.
- Apply NOVUS No. 2 liberally. Using a clean, soft
cloth, polish with a firm back-and-forth motion at right angles to
the scratches. Keep the cloth saturated with polish at all times.
- When the worst scratches have been polished out,
reapply NOVUS No.2 uniformly in a circular motion to the entire surface
using short, circular strokes and light pressure. Allow to dry to a light haze.
- Using a clean portion of the cloth, buff the surface
to a slippery glaze using firm, short strokes. This procedure is imperative
in achieving the best results.
- For heavy scratches, multiple applications of NOVUS
No. 2 or application of NOVUS No. 3 may be required.
- Follow with NOVUS No. 1 for best results.
#3 Heavy Scratch Remover
Removes heavy scratches and abrasions from most acrylic
surfaces. Use when damage is too severe to be restored with NOVUS No. 2 polish.
- Requires use of NOVUS No. 2 for final finishing
- Not recommended for use on coated plastic
- Remove surface dirt and dust.
- Shake well. Test in an inconspicuous area.
- Apply NOVUS No. 3 liberally. Using a clean, soft
cloth, polish with a firm back-and-forth motion at right angles to
the scratches. Keep the cloth saturated with polish at all times.
- Continue polishing until only fine scratches remain.
Using cloth, remove all remaining polish, this is very important!
- Using a clean cloth, apply NOVUS No. 2 in a circular
motion uniformly to entire surface. Polish using light pressure until
NOVUS No. 2 dries to a light haze.
- Using a clean portion of the cloth, buff the surface clean. Follow with NOVUS No. 1 for best results.
Suggested Uses
- Plastic Storm Windows & Skylights
- Boat Windows & Fiberglass
- Auto Interiors, Gauges, Chrome, & Acrylic Paint
- Collapsible Windows on Convertibles & Sport Utility Vehicles
- Motorcycle Windscreens, Visors, Fairings & Helmets
- Snowmobile Windshields, Helmets, & Hoods
- Turntable Dust Covers, Stereo Faceplates
- Compact Discs, Video Laser Discs, & CD ROM's
- Acrylic Hot Tubs & Spas
- Acrylic, Fiberglass or Cultured Marble Tubs, Showers & Counters
- Microwave Oven Doors, Decorator Acrylic Refrigerator Panels
- Acrylic Aquariums
- Telephones, Pagers, Scanners
- Acrylic Trophies & Awards
- Plastic Display Cases & Signs
- Gauges & Instrument Control Panels
- Safety shields & Goggles
- Airplane Windows
- Salad Bar Sneeze Guards
- Video Games, Pinball Machines & Jukeboxes
- Copiers and Fax Machines
- Acrylic Furniture
- Cash Registers & Calculators
- Emergency Vehicle Light Bar Lens Covers
- Acrylic on Tanning Bed
Some plastics are coated with a thin film which may be damaged by the abrasives in the polish. NOVUS No. 2 and No. 3 Polishes are not recommended for use on coated plastics or eyeglass lenses.
